How to Attach Camera to Tripods: The Two Stages Involved

How to Attach Camera to TripodsTaking photos is a thing of leisure for most people, but for photographers, it is an art. That is why they are always looking for ways to make each picture better than the last. Fortunately, various tools have been manufactured that will make it easier for them to snap clear and quality images. One of such is the tripod. It is a three-legged camera stand designed to support the camera, and in the process, minimizing shakiness, which is common when holding the camera for a long time. Thus, for it to serve its purpose well, you should learn how to attach camera to tripods correctly.

However, despite the simplicity of this tool, attaching it to a camera is something difficult for some people. With that said, below are the two stages and the steps under them to help you mount your camera correctly.

How to Attach Camera to Tripods: The Stages and Steps

Tripods come in various designs and models, but mounting a camera to a tripod is done similarly.

Stage 1: Preparing Your Tripod

  • Inspect Your Camera

The first thing that you need to do is to check your camera to know if it has a tripod mount. Even though cameras made these days are tripod-compatible, some smaller ones lack that feature. To know if your camera supports a tripod, check the bottom of the device and look for a small hole with screw heads. If this is lacking, then your camera cannot be mounted on a tripod. If your camera has, then you can proceed to the next step.

  • Detach the Camera Plate on Your Tripod

A tripod has a camera plate which is a piece that is used in fixing a camera to the tripod. The camera plate has a release clip or a lever that is used for detaching the camera plate from the remaining parts of the tripod. Note that there are several ways that you can attach your tripod. However, using the camera plate method is the easiest and most recommended.

Technically, detaching the mount from the tripod isn’t necessary, but it will make it very easy for you to screw your camera to the tripod. Not to make any mistakes, ensure that the camera plate attached to the tripod has the same screw size as your camera. This is because not every camera plate is compatible with every camera. If the camera plate does not fit the camera screw, you need not worry as you can purchase a new camera plate that is compatible with both your camera and tripod.

  • Level Your Tripod

The aim of adjusting the legs of the tripod is to make it stable while standing on the ground. To do so, the tensioners on each of the leg should be released. Then, raise them to attain the height you require. After extending the legs of the tripod, check them properly to ensure that they are locked in place before proceeding to mount your camera. Technically, it is possible for you to attach your camera to the tripod before you begin setting up the tripod. However, to keep your camera safe, it is better to set up your tripod first.

Remember that you should not always try to make the tripod stand at a level. What you need is for it to be balanced to the extent that a tilt shouldn’t be noticed. If you have a tripod that has an inbuilt bubble level feature, then you can use it to stabilize your rig. Nonetheless, you can purchase the rig if you wish to.

Stage 2: Mounting Your Camera and Troubleshooting

  • Screw Your Camera to the Tripod

There are several ways you can do this. You can decide to either screw your camera directly onto your tripod, clamp the camera into place, or tighten the camera screws to ensure that the camera remains steady. Nevertheless, the first thing that you need to do is look at the bottom of your camera, and find a threaded hole. If you have a matching screw with the tripod mount, then you should screw the camera directly onto your tripod. After screwing it, twist the pieces to ensure that they are joined properly.

Some tripods come with a small screw head attached to the underside of their plate. If yours have that, then you should tighten the screw head from the bottom of the plate rather than twisting the plate onto your camera. Ensure that you tighten it properly, but it shouldn’t be too tight as well. When the screws are too tight, they exert some stress on the mounting system which would either damage your camera or the tripod.

  • Clamp the Two Together

If you happen to have a tripod head that uses a clamping mechanism, then the clamp should be used in addition to the screw. To clamp the camera and the tripod together, place your camera between the clamps and locate the tightening mechanism. To make the clamp fit the camera, it is necessary for you to tighten the screws or twist the knobs. Keep adjusting the screws until the camera is firmly in place.

  • Mount the Camera Plate to the Tripod Again

If you had removed the camera plate from the beginning to ensure easy attachment, then, you will have to re-attach it back before you can use the tripod. Just locate the release lever and pull it back, then, attach the mounting plate to your tripod head and release the quick lever.

  • Test It Out

Once you are done, you should be able to handle the camera on the tripod and take some shots. To make it convenient for you, you can always move the rig. Look through your viewfinder to know if the lens is placed at a preferred angle before taking a shot. Also, ensure that the tripod is balanced and stable before taking any pictures. As a tip, if you decide to snap portrait photos, you can attach an L-bracket. It usually comes with some tripods as an attachment. If your tripod doesn’t have that, you can purchase one.

Conclusion

A tripod stand has the amazing ability to make it easier for you to snap pictures. By following the procedures listed above, you will know how to attach camera to tripods without hassles.